The Benefits of Punching Down The Cap
What is a cap? What is "punching
down"? | Why is it important to punch
Hints for punching down | Conclusion
If you've ever attempted to make a big red wine at home from fresh
grapes - but the finished product lacked color, taste, or astringency
- chances are, your wine could have benefited from a winemaking
technique known as "punching down".
This winemaking article will explain what a "cap" is,
the benefits of punching the cap down during fermentation, and provide
hints on how to do it. It does not discuss other methods of cap
management, such as rotary tank or pump over methods, which are
seen in commercial wineries.
This article is intended for home winemakers who make their own
wine from scratch (from fresh grapes or fruit). If you make wines
from kits, you will certainly benefit from this knowledge, but you
won't have to "punch down" since most kits do not include
grape solids like skins, stems, and pips.
What is a cap?
We'll define the "cap" as the solid mass of grape skins,
stems, and pips (seeds) that floats to the top of the fermenting
vessel during fermentation.
"Punching down" simply describes the process of breaking
up the cap and pushing it back down into the wine so that the cap
stays moist during fermentation. There are lots of benefits to punching
down... read on!
Why is it important to punch the cap down?
The main reason it is desirable to punch down this mass of skins,
stems, and seeds back into the liquid is that your wine will
have a richer color, flavor, and astringency.
Here are some other benefits of punching down the cap:
- During the early stages of fermentation, the physical act of
punching down helps introduce oxygen to your yeast cells, helping
them "kick start" fermentation.
- Punching down helps mix the yeast into the must.
- It helps keep harmful bacteria or mold from forming that could
ruin your wine.
- It ensures color, flavor, tannins and other phenolic compounds
are added to your wine.
- Punching down helps dissipate heat that naturally occurs during
fermentation. Left alone, the cap can reach high temperatures,
providing an environment that helps grow harmful bacteria.
Hints for punching down
First of all, take into consideration the size of your fermentation
vessel. If you are making 6 gallons of wine in a 6.5 gallon fermentation
bucket, you would lose a lot of wine over the side of the bucket
when you start punching down the cap. Remember, you will displace
the wine as you push the cap beneath the surface of the wine. Be
sure to allow for this displacement when you start your next batch
of wine by getting the right size bucket for your batch.
The best tool (at least for the home winemaker) for punching down
is probably a stainless steel potato masher. They're inexpensive,
easy to find, easy to clean, and have the right size footprint for
punching on a small scale. We've heard of some folks who use wooden
utensils for punching down, but we wouldn't recommend it... the
surface of wood is too porous and could easily harbor harmful bacteria
if not properly cleaned.
When you punch down, your goal should be to gently break up the
cap and work out all the lumps. When finished, the surface of the
wine should be smooth and moist throughout.
You should start punching down as soon as you pitch your yeast.
As already noted above, this will help mix the yeast into your wine
After the initial punching down, fermentation should proceed rapidly.
Due to the buoyancy provided by the CO2 bubbles during fermentation,
the cap will start to form and float to the top. You'll need to
punch down the cap about three times per day to ensure the
cap stays moist. Do not allow the cap to cake up or get dry on top.
The ideal temperature for this process is around 60 to 65 degrees
Fahrenheit. Do not allow your wine to get any hotter than 70 degrees
if you can help it.
At some point - and this depends on a lot of variables, like the
variety of grapes, temperature, Brix, SO2 and pH levels, type of
yeast used, etc. - the cap will stop forming at the top. You'll
notice that the solids in the wine will start to SINK instead of
float. This happens because fermentation is slowing down and there
are less CO2 bubbles to push the solids to the top.... and it's
your signal that it's time to PRESS.
If you're making a wine from scratch, punching down the cap during
fermentation is one of the most important things you can do to ensure
full color, taste, and astringency.
Punching down is easy to do, but it must be done consistently (about
3 times per day) in order to achieve the desired effect. The basic
rule of thumb is to keep the cap broken up and moist so long as
the cap continues to form at the top of the fermentation vessel.
It is time to press when the cap no longer floats to the surface
of the wine.
Clicking on any of the reference links below will open a new browser
- A group focusing on the science and art of winemaking at any level.
Anyone interested is encouraged to join!
[ Back to Winemaking Articles
| grapestompers home